Which way forward? Comparing radiological outcomes using three different surgical approaches in robotic assisted total hip arthroplasty.

OBJECTIVES: To assess the accuracy and precision of acetabular component placement in robot-assisted surgery total hip arthroplasty (RAS-THA) using three different approaches. METHODS: This study is a secondary analysis from a multicenter, randomized controlled trial comparing the Trex RS Hip 1.0 robot navigation system across different surgical approaches. It involved 145 patients treated at three Chinese medical centers from June 2021 to July 2022. Patients with end-stage joint disease were randomly assigned to either the RAS or control group. Acetabular component positioning was evaluated radiographically, and registration accuracy was measured using Root Mean Square Error (RMSE). RESULTS: The overall RMSE was 0.72 mm (SD = 0.24 mm), indicating consistent accuracy regardless of surgical approach. Significant variations in anteversion were noted across groups (p = 0.001). Lateral RAS-THA showed enhanced precision. The RAS Direct Anterior Approach (DAA) group had the least deviation in the rotation center's horizontal distance (0.89 ± 1.14 mm, p = 0.0014) and minimal leg length discrepancy (2.41 ± 1.17 mm). The RAS DAA approach also produced more consistent results. CONCLUSION: Robotic assistance in THA, especially via the DAA approach, enhances the accuracy and precision of acetabular component positioning. Consistent registration accuracy across various surgical approaches confirms the reliability of these methods for THA. CLINICAL TRIAL REGISTRATION: www.clinicaltrials.gov identifier is ChiCTR2100044124.

Radiographic Evaluation in Implant Patients: A Review.

Diagnostic imaging is crucial in assessing dental implant patients. The height, width, and shape of the bone are precisely depicted and measured by these tests, which help pinpoint the locations of significant anatomical structures adjacent to the implant placement sites. The type of implant to be utilized, the positioning of the remaining dentition, and the degree to which bone quality or quantity is in question all play a role in determining the radiologic approach that is most suited for a given patient. This review is an update on the current knowledge in the field of radiographic evaluation in implant placement. Considering the radiation exposure and the expense of each test, it is important to carefully determine whether pre-implant imaging is acceptable in each situation. Although multislice computed tomography is the gold standard from the authors' perspective, not every implant situation can justify such a test.

Radiographic Cone Zone Classification of Metaphyseal Cone Fixation in Revision Total Knee Arthroplasty.

Background: No objective radiographic scoring system exists to classify metaphyseal cone stability. Our purpose was to create a novel, systematic method to radiographically evaluate metaphyseal cone fixation based on radiographic findings suggestive of cone stability. Methods: A retrospective analysis was conducted of revision total knee arthroplasty patients (6/2015-12/2017) using porous titanium femoral or tibial metaphyseal cones in conjunction with short cemented stems (50 mm-75 mm). Minimum follow-up was 2 years. Survivorship free of aseptic loosening and reoperation, as well as radiographic evaluation using a novel cone zone scoring system were analyzed. Results: Forty-nine revision total knee arthroplasties were included in the study (12 femoral, 48 tibial cones), the majority, performed for aseptic loosening (25/49, 51%). Median follow-up was 39 months (range 25-58). Using the radiographic cone zone scoring method, >90% of all femoral cones were classified as likely stable or stable with strong, statistically significant intraclass correlations between all 3 reviewers. Similarly, >97% of all tibial cones were classified as likely stable or stable, with moderate, statistically significant intraclass correlations between all 3 reviewers. Only 1 femoral and 1 tibial cone were considered at risk of loosening. The study sample demonstrated 100% survivorship free of revision for aseptic loosening without evidence of radiographic loosening in any case. Conclusions: Using a novel systematic cone zone scoring and classification method, the overwhelming majority of femoral and tibial cones were classified as likely stable or stable, with no identified cases of aseptic loosening or related revision. Further studies are needed to validate this objective classification method.

Changes in aspects of hoof and distal limb conformation in foals by radiographic evaluation.

This study investigated age-related radiographic changes in the distal parts of the forelimbs by radiographic evaluation and identified the radiographic changes associated with diseases specific to foals. The hoof angle (HA), distal phalanx angle (P3A), distal phalanx palmer angle (P3PA), distal interphalangeal joint angle (DIPJA), and metacarpophalangeal joint angle (MPJA) on lateromedial radiographs of forelimbs were measured on the day after birth (Day 1); at 1, 2, 4, 6, and 8 weeks of age; and then at monthly intervals until 12 months of age. HA and P3A significantly increased from 1 day to 4 weeks and 4 weeks to 3 months of age. The P3PA increased dramatically from 1 day to 1 week, 1 week to 2 weeks, and 2 weeks to 8 weeks of age, and then decreased after 3 months of age. DIPJA significantly decreased from 1 day to 2 weeks of age before increasing from 3 to 5 months of age. MPJA increased with age until 4 weeks, slightly decreased from 2 to 4 months of age, and then gradually decreased from 4 to 6 months of age. The findings indicate that foals' forelimbs typically show flexion of the fetlock and a broken backward hoof-pastern axis just after birth, an upright fetlock until 4 months of age, and a change to a mature conformation after 6 months of age. Physiological variants were correlated with the occurrence of common foal diseases during the radiographic evaluation periods.

Radiographic evaluation of teeth with pulp stones and pulp canal obliteration: characteristics, and associations with dental parameters.

The study aimed to radiographically assess the characteristics of pulp stones (PS) and pulp canal obliteration (PCO) in teeth and examined their associations with various dental parameters such as caries, restorations, periodontal status, and age. This cross-sectional observational study was conducted at the Faculty of Dentistry, King Abdulaziz University between September 2022, and May 2023, involved 101 patients exhibiting 402 teeth with PS or PCO. Data were collected from periapical and bitewing radiographs, and analyzed by two calibrated dentists. Multiple dental parameters were assessed, including caries level, presence and level of restorations, periodontal condition, and age of the patient. The study population consisted of 62 females and 39 males, with an age range of 18-65 years. Inter- and intra-examiner reliability were high (Kappa = 0.88 and 0.98 respectively). PS were more commonly found in molars (81.2%), while PCO were presented in only 115 teeth (23%). Age significantly affected the type of calcification (p < 0.001), with PS more common in the 20-30 age group and PCO more common in individuals over 40. Presence of caries was significantly associated with the type of calcification (p = 0.013), but restoration was not. The majority of teeth with PS (76%) or PCO (93%) had healthy periodontium. Around 40% of teeth with PCO showed signs of periapical changes, a finding significantly different from those with PS (p < 0.001). Pulp calcifications were significantly associated with various dental parameters, including caries presence, age, and periodontal status. The findings provide crucial insights into the epidemiology and aetiology of pulp calcifications.

A randomized, multicenter, double-blinded parallel study to evaluate the safety and performance of zoledronate-coated versus uncoated dental implants in partially edentulous patients.

OBJECTIVE: To evaluate patient safety, implants survival and implant stability of the bisphosphonate (zoledronate) as a coating on dental implants in patients requiring oral rehabilitation in the posterior maxilla. MATERIALS AND METHODS: In this multicenter, double-blind, randomized controlled study, 62 patients were randomized to receive either zoledronate-coated or uncoated control implants in the premolar or molar area of the maxilla, using a one stage-protocol. Due to dropouts and exclusion 49 patients completed the study. The implants were examined by resonance frequency analysis (RFA) using an implant stability quotient (ISQ) scale at the time of insertion, and at 8 weeks, and after 12 weeks prior to prosthetic restoration. Radiographs were taken prior to surgery, directly after insertion, and during the follow-up at 12 weeks, 6 months, and 1 year to analyze changes in marginal bone levels (MBL). Finally, all complications and adverse effects (AE) were observed and recorded. RESULTS: Out of 62 included patients, 49 patients completed the study. No AE were reported by patients receiving zoledronate-coated implants. There was no statistically significant difference between the zoledronate-coated or uncoated implant groups when comparing ISQ levels at insertion and after 12 weeks of healing, the mean of the ISQ values demonstrated a change of 4.64 (95% confidence interval: 15.46; 5.79, p = 0.43) between the two groups. At 8- and 12-weeks, ISQ values remained stable (range 62-70). Radiographic analysis showed no statistically significant difference in MBL between the two implant groups after 1 year of loading neither at the mesial side (p = 0.99) or the distal side (p = 0.97). MBL for coated implants were 0.57 mm at the mesial side and 0.46 mm at the distal side. For the uncoated implants, MBL was 0.48 mm at the mesial side and 0.47 mm at the distal side. CONCLUSION: The zoledronate-coated dental implants are safe to use in a one-stage surgery protocol in patients requiring oral rehabilitation in the posterior maxilla, after 1 year of loading. There were no statically significant changes in implant stability and marginal bone levels measured by intraoral radiographs in comparison to uncoated control implants.

Alveolar cleft reconstruction utilizing a particulate autogenous tooth graft and a novel split-thickness papilla curtain flap - A retrospective study.

During secondary alveolar cleft grafting, the use of autogenous cancellous bone harvested from the iliac crest is still considered the gold standard. Due to the risk of donor-site morbidity and excessive graft resorption, alternative grafting materials (e.g. intraoral bone, xenografts) have been tested. Autogenous tooth bone graft (ATB) is a novel material derived from extracted teeth. ATB has successfully been used in pre-prosthetic and periodontal surgery for hard-tissue reconstruction. Seven patients with unilateral cleft lip and palate were treated with ATB, using their own deciduous teeth for grafting. Defects were accessed utilizing a novel split-thickness papilla curtain flap. Cone-beam computed tomography scans were taken prior to and 3 months following cleft surgery to assess graft integration, graft stability, and the volume of the newly formed hard tissues. Hard-tissue gain, as measured at the 3-month follow-up, averaged 0.65 cm3 ± 0.26 cm3. Results showed acceptable graft integration and stability at the 3-month follow-up, with no adverse effects or excessive resorption of the graft. The use of ATB might be a feasible alternative for alveolar cleft grafting. However, long-term studies using a large sample size are required to derive further conclusions.

Radiographic comparison of atelocollagen versus deproteinized bovine bone minerals covered with a collagen membrane in alveolar ridge preservation: a retrospective study.

BACKGROUND: Atelocollagen (AC) is a low-immunogenic collagen derivative with longer degradation time, which can be a suitable material for alveolar ridge preservation (ARP). However, there are few human studies on AC using for ARP. This research aims to radiographically evaluate the efficacy of AC in comparison to deproteinized bovine bone minerals covered with a collagen membrane (DBBM/CM) in ARP. METHODS: Medical records in the Implantology Department of the Hospital of Stomatology of Wuhan University were screened for patients who received flapless ARP using either AC or DBBM/CM. A total of 58 patients were included in this retrospective study. 28 patients were treated with AC, while 30 patients were used DBBM/CM. Cone-beam computed tomography (CBCT) scans were taken before extraction and after 6 months of healing. To assess the dimensional change of the extraction sockets, the scanning data were output and transferred to the digital software to measure horizontal bone width change, vertical bone height change and bone volume change in region of interest. To evaluate the bone quality of healed sockets, the bone density of virtual implants was evaluated. RESULTS: The horizontal bone width changes at all five different levels showed no significant difference between the two groups. The largest horizontal bone width decrement in both groups occurred at the crest of ridge, which decreased 3.71 ± 1.67 mm in AC group and 3.53 ± 1.51 mm in DBBM/CM group (p = 0.68). At the central buccal aspect, the ridge height reduced 0.10 ± 1.30 mm in AC group, while increased 0.77 ± 2.43 mm in DBBM/CM group (p = 0.10). The vertical bone height differences between two groups showed no statistical significance. The percentages of volume absorption in AC group and DBBM/CM group were 12.37%±6.09% and 14.54%±11.21%, respectively. No significant difference in volume absorption was found (p = 0.36). The average bone density around virtual implants in AC group (649.41 ± 184.71 HU) was significantly lower than that in DBBM/CM group (985.23 ± 207.85 HU) (p < 0.001). CONCLUSIONS: ARP with AC had a similar effect on limiting the dimensional alteration of alveolar ridge, when radiographically compared with DBBM/CM.

Clinical and Radiographic Evaluation of Autologous Platelet-Rich Fibrin With or Without Demineralized Bone Matrix in the Treatment of Grade II Furcation Defects.

Introduction This study aims to differentiate the employment of demineralized bone matrix (DMBM; Osseograft, Advanced Biotech Products (P) Ltd, Chennai, India) and platelet-rich fibrin (PRF) alone to a composite graft consisting of both materials in the surgical actions toward the anomalies of the human periodontal furcation imperfection. Methods In a split-mouth study, 30 patients with mandibular molars affected by the furcation were allocated without conscious choice to test (PRF + DMBM, n = 30) or control (PRF, n = 30) categories. At the starting point, three months after surgery, and six months later, the following modifiable factors were evaluated: probing pocket depth (PPD), full-mouth plaque scores, full-mouth gingival scores, radiographic defect depth, relative vertical clinical attachment level (RVCAL), and relative horizontal clinical attachment level (RHCAL). Results Results at three and six months demonstrated substantial differences between baseline values for both treatment methods in clinical and X-ray imaging appraisal. Nonetheless, the PRF/DMBM group manifests statistically significantly soaring changes observed in comparison to the PRF group. Overall, the probing depth (PD) in the test site was significantly lower than that in the control site, showing a reduction of 68% (95% CI=41%, 95%, p<0.001). Conclusion Clinical indications significantly improved with PRF and DMBM combined instead of PRF alone. On radiographs, the test group also showed higher bone fill.

Prediction of the survival of patients with advanced-stage ovarian cancer patients undergoing interval cytoreduction with the use of computed tomography reevaluation after neoadjuvant chemotherapy.

PURPOSE: To predict ovarian cancer patients' survival by computed tomography (CT) reevaluation after neoadjuvant chemotherapy. PATIENTS AND METHODS: In this retrospective single-center cohort study, all patients with advanced epithelial ovarian cancer underwent platinum-based chemotherapy followed by interval cytoreductive surgery. Assessment of abdominal and pelvic lesions before and after chemotherapy using CT scoring criteria. Meanwhile, the progression-free survival and overall survival times were obtained. The Kaplan-Meier method was used to estimate survival curves. Univariate analysis of continuous and categorical variables was performed for prognostic significance using the Cox proportional hazards model. Variables with p < 0.10 on univariate analysis were then included in a multivariate forward stepwise Cox regression analysis. RESULTS: A total of 162 patients were included, with a median age of 52 years (range, 20-72 years). One hundred seven patients (66.0%) underwent suboptimal cytoreduction, and there was no statistically significant difference in patient survival between surgical procedures (log-rank p = 0.092). Six radiographic features were hazard factors for suboptimal cytoreduction. Four features in the postchemotherapy CT images were assigned as predictive criteria by the stepwise regression model (area under the curve [AUC] = 0.689). As compared with a higher AUC (0.713) in the model involving two clinical variables (age and postsurgery CA-125) and two postchemotherapy CT features, the model considering the CT score changes before and after chemotherapy had the highest diagnostic accuracy (AUC = 0.843). CONCLUSION: CT reevaluation after neoadjuvant chemotherapy is essential for ovarian cancer, the changes of CT feature and score are potential great tools to predict patient survival.

Radiographic signs of excessive occlusal forces are associated with marginal bone loss: a retrospective clinical study.

OBJECTIVES: Work in animal models has implicated excessive occlusal forces and occlusal trauma as co-destructive factors for periodontitis. The main aim of the present study was to make a radiographic assessment of the effects of excessive occlusal forces, ie occlusal/incisal tooth wear, widening of the periodontal space, and the presence of a mandibular torus, on interproximal marginal bone loss in a large series of patients. A secondary aim was to evaluate the statistical correlation between the parameters in two specific teeth and those of 12 teeth for marginal bone loss and six teeth for occlusal/incisal tooth wear within the same individual. METHOD AND MATERIALS: A total of 1,950 full-mouth radiographic surveys were analyzed retrospectively. Interproximal marginal bone loss was quantified relative to the root length (Schei ruler technique). In addition, occlusal/incisal tooth wear and periodontal ligament space widening of the periodontal space were assessed, as well as the presence of a mandibular torus. Odds ratio and logistic regression analysis were used to determine the association between occlusal trauma and marginal bone loss. RESULTS: The correlation of the measured parameters between the values for specific teeth and the whole dentition was evaluated from data from the first 400 radiographs. Teeth 41 and 33 showed the best correlation to the whole dentition: 0.85 for interproximal marginal bone loss, 0.83 for widening of the periodontal space, and 0.97 for occlusal/incisal tooth wear. The results of a logistic regression analysis with age as an independent variable, revealed a significant association between bone loss and both tooth wear (odds ratio = 2.767) and bone loss and widening of the periodontal space (odds ratio = 2.585). CONCLUSION: Tooth wear was positively correlated to both widening of the periodontal space and marginal bone loss. No correlation was found between the presence of a mandibular torus and marginal bone loss.

Relationship between development of the condylar cortex and the changes in condyle morphology: a cone-beam computed tomography (CBCT) observational study.

Background: A correct understanding of the mandibular condyle morphology may help clinicians judge the normal range of morphological variations of asymptomatic patients or the pathological conditions correctly. Hence, the aim of the present study was to evaluate the status of condyle cortication and condyle morphology, and to investigate the relationship between the development of the condylar cortex and the changes of condyle morphology. Methods: The present study was an observational study. A total of 1,010 temporomandibular joint (TMJ) cone-beam computed tomography (CBCT) images were collected retrospectively. The mandibular condyle morphology was observed in axial (concave, convex, plane and others for anterior and posterior facets), coronal (plane, convex, angled and round for superior facet) and sagittal (round and plane for superior facet) views, and the condylar cortication was grouped into three types (undeveloped, developing and developed). Analytical statistics were performed to detect a relationship between the cortication status and morphology of the condyles. Results: For males and females, the mean age was 15.11±2.71 and 14.25±2.60 years (for condylar bone without cortication), 19.45±3.92 and 18.65±3.45 years (with developing cortical bone), 23.63±3.36 and 23.86±3.73 years (with developed cortical bone), respectively. The condyle morphology with a plane form in the anterior aspect, a convex form in the posterior aspect, a convex form in the coronal view and a round form in the sagittal view was the most often recorded condyle morphologies (13.2%). After the cortical bone of condyle completely forms, the plane form was significantly increased in the superior surface in both sagittal and coronal views. Conclusions: The condylar shape gradually changes with growth and development of the condyle bone cortex. The more mature the bone cortex is, the higher the probability that the condyle will have an uneven shape, which may mean that the condyle morphology may change due to remodeling during growth and development.

Are There More Radiolucent Lines in Patients Who Underwent Total Knee Arthroplasty With or Without a Tourniquet During Cementation at 5 to 8 Years After Surgery?

BACKGROUND: This study investigated the presence and progression of radiolucent lines (RLLs) after cemented total knee arthroplasty (TKA) with or without tourniquet use. METHODS: There were 369 consecutive primary cemented TKAs with 5 to 8 years of follow-up. A tourniquet was used during component cementation in patients who underwent surgery from January 3, 2006, to March 31, 2010. No tourniquet was used from August 14, 2009, to October 14, 2014. There were 192 patients in the tourniquet group (TQ) and 177 patients in the no tourniquet group (NQ). Patient demographics, reoperations, and complications were recorded. RLLs were identified on anteroposterior, lateral, and skyline x-rays at 1, 2, and 5 to 8 years postoperatively using the modern knee society radiographic evaluation system. Demographics, reoperations, complications, and RLLs were compared. Age, sex, and body mass index were similar between groups. Mean tourniquet time in TQ was 11 minutes (range, 8 to 25). RESULTS: The presence of RLLs differed between groups, with 65% of TQ knees having RLLs under any part of the prostheses versus 46% of NQ knees (P < .001). The progression of RLL >2 mm occurred in 26.0% of knees in TQ and 16.7% of knees in NQ (P = .028). There were 13 TKAs that underwent subsequent revision surgery. There was no statistically or clinically significant difference in revision rate between groups (7 revisions in TQ, 6 in NQ, P = .66). CONCLUSION: Less RLLs were identified in NQ versus TQ. There were no statistically or clinically significant differences in revision rates between the NQ and TQ groups at 5 to 8 years.

Three-dimensional volumetric assessment of hard tissue alterations following horizontal guided bone regeneration using a split-thickness flap design: A case series.

OBJECTIVES: To analyze morphological, volumetric, and linear hard tissue changes following horizontal ridge augmentation using a three-dimensional radiographic method. METHODS: As part of a larger ongoing prospective study, 10 lower lateral surgical sites were selected for evaluation. Horizontal ridge deficiencies were treated with guided bone regeneration (GBR) using a split-thickness flap design and a resorbable collagen barrier membrane. Following the segmentation of baseline and 6-month follow-up cone-beam computed tomography scans, volumetric, linear, and morphological hard tissue changes and the efficacy of the augmentation were assessed (expressed by the volume-to-surface ratio). RESULTS: Volumetric hard tissue gain averaged 605.32 ± 380.68 mm3. An average of 238.48 ± 127.82 mm3 hard tissue loss was also detected at the lingual aspect of the surgical area. Horizontal hard tissue gain averaged 3.00 ± 1.45 mm. Midcrestal vertical hard tissue loss averaged 1.18 ± 0.81 mm. The volume-to-surface ratio averaged 1.19 ± 0.52 mm3/mm2. The three-dimensional analysis showed slight lingual or crestal hard tissue resorption in all cases. In certain instances, the greatest extent of hard tissue gain was observed 2-3 mm apical to the initial level of the marginal crest. CONCLUSIONS: With the applied method, previously unreported aspects of hard tissue changes following horizontal GBR could be examined. Midcrestal bone resorption was demonstrated, most likely caused by increased osteoclast activity following the elevation of the periosteum. The volume-to-surface ratio expressed the efficacy of the procedure independent of the size of the surgical area.

Radiographic angle width as predictor of clinical outcomes following regenerative periodontal therapy with enamel matrix derivative: a retrospective cohort study with a mean follow-up of at least 10 years.

OBJECTIVES: To assess the association between the baseline radiographic defect angle and the long-term clinical outcomes following periodontal regenerative therapy with enamel matrix derivative (EMD). METHOD AND MATERIALS: Baseline periapical radiographs obtained from a cohort of patients treated with periodontal regenerative therapy were digitized and the radiographic angle width between the root surface and the bony wall of the adjacent intraosseous defect was calculated and reported (in degrees). Changes in pocket probing depth (PD) and clinical attachment level (CAL) were assessed and reported (in mm). Clinical outcomes were evaluated at baseline (T0), 6 months following therapy (T1), and at the latest follow-up (T2). RESULTS: Thirty-eight defects in 26 patients enrolled in supportive periodontal care for a mean period of 10.4 years (range 8.0 to 15.5 years) were available for analysis. The mean PD change between T0 and T2 was 2.33 ± 1.66 mm at teeth with a defect angle width < 20 degrees and 0.86 ± 1.66 mm at teeth with a defect angle width > 30 degrees (P = .021). When the baseline radiographic angle width was < 20 degrees the probability of obtaining a CAL gain > 3 mm was 1.5-times higher (95% CI 0.19 to 13.8) at T1 and 2.5-times higher (95% CI 0.40 to 15.6) at T2 compared with defects with a radiographic angle width > 30 degrees. CONCLUSION: Within their limitations, these results indicate that pretherapeutic measurement of the radiographic defect angle width might provide relevant information on the short-/long-term clinical outcomes following regenerative periodontal therapy with EMD.

Management of displaced humeral surgical neck fractures in daily clinical practice: hanging does not re-align the fracture.

INTRODUCTION: It is unclear if the collar and cuff treatment improve alignment in displaced surgical neck fractures of the proximal humerus. Therefore, this study evaluated if the neckshaft angle and extent of displacement would improve between trauma and onset of radiographically visible callus in non-operatively treated surgical neck fractures (Boileau type A, B, C). MATERIALS AND METHODS: A consecutive series of patients (≥ 18 years old) were retrospectively evaluated from a level 1 trauma center in Australia (inclusion period: 2016-2020) and a level 2 trauma center in the Netherlands (inclusion period: 2004 to 2018). Patients were included if they sustained a Boileau-type fracture and underwent initial non-operative treatment. The first radiograph had to be obtained within 24 h after the initial injury and the follow-up radiograph(s) 1 week after trauma and before the start of radiographically visible callus. On each radiograph, the maximal medial gap (MMG), maximal lateral gap (MLG), and neck-shaft angle (NSA) were measured. Linear mixed modelling was performed to evaluate if these measurements would improve over time. RESULTS: Sixty-seven patients were included: 25 type A, 11 type B, and 31 type C fractures. The mean age (range) was 68 years (24-93), and the mean number (range) of follow-up radiographs per patient was 1 (1-4). Linear mixed modelling on both MMG and MLG revealed no improvement during follow-up among the three groups. Mean NSA of type A fractures improved significantly from 161° at trauma to 152° at last follow-up (p-value = 0.004). CONCLUSIONS: Apart from humeral head angulation improvement in type A, there is no increase nor reduction in displacement among the three fracture patterns. Therefore, it is advised that surgical decision-making should be performed immediately after trauma. LEVEL OF CLINICAL EVIDENCE: Level IV, retrospective case series.

A scoping study of pulmonary paracoccidioidomycosis: severity classification based on radiographic and tomographic evaluation.

The lungs have great importance in patients with paracoccidioidomycosis since they are the portal of entry for the infecting fungi, the site of quiescent foci, and one of the most frequently affected organs. Although they have been the subject of many studies with different approaches, the severity classification of the pulmonary involvement, using imaging procedures, has not been carried out yet. This study aimed to classify the active and the residual pulmonary damage using radiographic and tomographic evaluations, according to the area involved and types of lesions.

Retratamientos endodónticos: una realidad que preocupa / Endodontic retreatment: a worrying reality

Las evaluaciones radiográficas de tratamientos endodón- ticos realizadas por graduados muestran un alto porcentaje de procedimientos incorrectos. Esta circunstancia lleva a la rea- lización de un elevado número de retratamientos ortógrados y retrógrados, con los inconvenientes y desventajas que conlle- va recurrir a una reintervención endodóntica. Es responsabili- dad de los profesionales, docentes y autoridades universitarias y gubernamentales revertir esta situación que afecta a la salud bucal de la sociedad. En el presente editorial se proponen di- ferentes alternativas para intentar modificar este preocupante panorama (AU)

Radiographic evaluations of endodontic treatments per- formed by graduates show a high percentage of incorrect procedures. This circumstance leads to the performance of a high number of orthograde and retrograde retreatments, with the inconveniences and disadvantages that entails resorting to an endodontic reintervention. It is the responsibility of pro- fessionals, teachers, university and government authorities to reverse this situation that affects the oral health of society. In this editorial, different alternatives are proposed to try to modify this worrying outlook (AU)

Hip hemiprosthesis due to femoral neck fracture in the elderly population - are we doing it right?

Introduction: Femoral neck fracture is one of the most common orthopaedic traumas affecting the elderly population. The standard treatment method is hip hemiarthroplasty and total hip arthroplasty. In hip hemiprostheses surgeons mainly have to reconstruct the femoral offset and limbs' length to obtain the correct gait biomechanics and a satisfactory surgical outcome.The aim of this study is to examine the radiological results of patients after hip hemiarthroplasty for femoral neck fracture and to evaluate the reconstruction of the femoral offset using standard neck angle stems. Material and methods: A consecutive series of 97 patients diagnosed with femoral neck fracture treated with a hip hemiprosthesis between 2017 and 2021 was identified and met the inclusion criteria. On preoperative images, the neck-shaft angle and the femoral offset on the healthy limb were measured. The femoral offset of the operated limb was measured on the postoperative X-rays. Results: There was a significant positive moderate correlation between neck-shaft angle and femoral offset change (r = 0.568, p < 0.0001). There was a statistically significant difference between femoral offset change and neck-shaft angle (24:52 vs. 14:7, p = 0.005). This means that in patients with coxa vara the change in femoral offset was more often < -5 mm. Less than half of operated patients had the femoral offset restored within a safe range (between -5 and 5 mm). Conclusions: Our study proved that it is sometimes hard to achieve femoral offset within a safe range while performing hip hemiarthroplasty in patients with coxa vara. The topic of using high offset stems in partial hip arthroplasty has not been thoroughly researched worldwide. However, taking into account the results of our study, during a hip hemiarthroplasty the usage of high offset stems for varus hips should be considered in order to improve the clinical outcome and improve patients' quality of life and functioning.

Comparative Study of the Crestal vs Subcrestal Placement of Dental Implants via Radiographic and Clinical Evaluation.

AIM: The study aims at using the level/depth of implant placement (equicrestal or cretsal) as the key parameter in measuring the vertical crestal bone loss (CBL) mesially and distally, using periapical radiographs (IOPARs) taken at 1-, 3-, and 6-months interval, postprosthetic loading. MATERIALS AND METHODS: Patients (n = 40; 18-65 years), with edentulous space anteriorly or posteriorly, were randomly divided into two groups, namely, group I (equicrestal) and group II (subcrestal) with 20 patients in each group. Implants were placed at an edentulous site (delayed implants), after obtaining cone-beam computed tomography (CBCT) scans. Prosthetic loading (following osseointegration) was done within 3 months of implant placement. The patients were followed up and IOPAR were taken to measure CBL at 1-, 3-, and 6-months interval, postloading. The CBL between the two groups was compared using IOPARs. The data obtained was compiled and unpaired Student's t-test was done for statistical analysis. RESULTS: After the statistical analysis of the data obtained during follow-up, CBL was measured radiographically. Mesial and distal vertical bone loss was charted and compared between the two groups. The mean bone loss on the mesial aspect for group I implants is 0.39 mm and for group II implants, it is 0.27 mm, 6 months postloading, determined radiographically. CONCLUSION: Subcrestally placed implants are conducive to the overall oral rehabilitation, as it has been seen to preserve marginal peri-implant bone for longer durations than their equicrestally placed counterparts, within the limitations of the current study. CLINICAL SIGNIFICANCE: The study prospectively relates the level of implant shoulder with respect to alveolar crestal bone, postloading. Following radiographic comparison between the two groups, significant clinical findings indicated that better esthetics and stability were seen in the subcrestally placed implants. This proves that implant placement level directly influences crestal bone levels; hence, indirectly affects esthetics and function.